Towers is an arithmetical-logical puzzle whose goal is to fill in an N×N grid with integers, so that every row and every column contains all the integers from 1 through N, and so that certain extra constraints can be met. These extra constraints are specified by counts of which towers are visible from an edge of the grid, assuming that each grid entry is occupied by a tower whose height is given by the grid entry. There are 4N counts since the grid has four edges. For example, if N is 5 and the counts for the top, bottom, left, and right edges are [2,3,2,1,4], [3,1,3,3,2], [4,1,2,5,2], and [2,4,2,1,2] respectively, then there is one solution with rows [2,3,4,5,1], [5,4,1,3,2], [4,1,5,2,3], [1,2,3,4,5], [3,5,2,1,4] respectively, as shown in the corresponding puzzle in Simon Tatham’s implementation of the Towers puzzle.
A human doing the abovementioned puzzle can reason it out with arguments like the following. A 5 must be adjacent to each 1 count. The only remaining row or column lacking a 5 is the center row and column, so the center must be a 5. The 5 count at the left of row 4 means that row 4 must be [1,2,3,4,5]. The 4 count for column 5 means that row 1 column 5 must be a 1 or 2, and the 4 count for row 1 therefore means that row 1 must be either [1,3,4,5,2] or [2,3,4,5,1], so we can safely assume row 1 columns 2 and 3 must be [3,4]. For fun, you might try filling out the rest of the puzzle, using similar reasoning.
A computer solving this problem doesn’t need to be that smart. It can rely on a small list of solution strategies rather than the ad hoc approach taken by humans.
Three things. First, write a predicate tower/3 that accepts the following arguments:
!. N, a nonnegative integer specifying the size of the square grid.
#. T, a list of N lists, each representing a row of the square grid. Each row is represented by a list of N distinct integers from 1 through N. The corresponding columns also contain all the integers from 1 through N.
$. C, a structure with function symbol counts and arity 4. Its arguments are all lists of N integers, and represent the tower counts for the top, bottom, left, and right edges, respectively.
Precondition. No solution will involve an integer that exceeds the vector_max of the GNU Prolog finite domain solver. Also, all arguments must be finite terms of the proper types. Your code need not check these preconditions; it can assume
Second, write a predicate plain_tower/3 that acts like tower/3 but does not use the GNU Prolog finite domain solver. Instead, plain_tower/3 should enumerate the possible integer solutions using standard Prolog primitives such as member/
2 and is/2. Although plain_tower/3 should be simpler than tower/3 and should not be restricted to integers less than vector_max, the tradeoff is that it may have worse performance. Illustrate the performance difference on a test case of your own design, measuring performance with statistics/0 or statistics/2. Package up your test case in a predicate speedup/1, which runs both tower/3 and plain_tower/ 3 and unifies its argument to the floating-point ratio of the latter’s total CPU time to the former (hopefully this figure will be greater than 1).
Third, consider the problem of ambiguous Towers puzzle. Write a Prolog predicate ambiguous(N, C, T1, T2) that uses tower/3 to find a single N×NTowers puzzle with edges C and two distinct solutions T1 and T2, and use it to find an ambiguous puzzle. Report the ambiguous puzzle you found.
As a trivial example, tower(0,T,C) should generate one solution N=0, T=, C=counts(,,,). tower(1,T,C) should generate one solution N=1, T=[], C=counts(,,,). tower(2,T,C) should generate the two solutions N=2, T=[[1,2],[2,1]], C=counts([2,1],[1,2],[2,1],[1,2]) and N=2, T=[[2,1],[1,2]], C=counts([1,2],[2,1],[1,2],[2,1]), in either order. tower(3,T,C) should generate several solutions, one of which is N=3, T=[[1,2,3],[2,3,1],[3,1,2]], C=counts([3,2,1], [1,2,2],[3,2,1],[1,2,2]). If the second and third arguments are variables, the number of solutions grows rapidly with N: for example, tower(3,T,C) should generate a dozen solutions, and tower(4,T,C) should generate hundreds of solutions.
You should be able to use tower/3 to generate edge counts from grids and vice versa. For example, the query:
should output this (reindented to fit):
and if you respond with a “;” the next result should be “no”. Conversely, the query:
?- tower(5, T,
should output this (reindented to fit):
T = [[2,3,4,5,1],
and again if you respond with a “;” the next result should be “no” because this puzzle has only one solution.
Here is an example of variables in both the second and third arguments:
It should generate this single solution:
BottomTail = [2,2,2,1]
Left1 = 4
Left2 = 1
Left3 = 2
Left4 = 2
Right = [2,4,2,2,1]
Row3 = [4,1,5,2,3]
Row4Tail = [2,1,4]
Row5 = [1,2,3,4,5]
Top = [2,3,2,1,5]
Submit a Prolog file named tower.pl containing all the requested code. Also submit a text file tower-notes.txt that contains the requested information that is not source code.